Spread the love

The surface of the stainless steel plate is smooth, has high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. It is an alloy steel that is not easily rusted. The stainless steel plate refers to a steel plate that is resistant to corrosion by weak media such as atmosphere, steam, and water, and the acid-resistant steel plate high quality rectangular steel pipe refers to a steel plate that is resistant to corrosion by chemical etching agents such as acid, alkali, and salt.

The stainless steel sheet has the ability to withstand general corrosion similar to the unstable nichrome 304. Prolonged heating in the temperature range of chromium carbide may affect alloys 321 and 347 in harsh corrosive media. Mainly used in high temperature applications, high temperature applications require strong sensitization of materials to prevent intergranular corrosion at lower temperatures.

High temperature oxidation resistance
Stainless steel plates have high temperature oxidation resistance, but the oxidation rate is affected by inherent factors such as the exposed environment and product morphology.

The selection of stainless steel plates should consider the operating conditions, such as manual operation or automatic operation, the performance and type of the hot press, and the quality requirements of the pressed materials such as hardness and gloss. Also consider the economic accounting, each time a new polished steel plate, the number of times to produce a slow quality decorative board.
In addition, when selecting the reasonable thickness of the steel plate, the time, quality and rigidity of the steel plate should be considered, and the strength requirements of the plate under pressure should be considered; the heat conduction performance; the pressure distribution, the format of the pressure plate.

If the thickness of the steel plate is not enough, it is easy to bend, which will affect the production of decorative panels. If the thickness is too large, the steel plate is too heavy, which not only increases the cost of the steel plate, but also brings difficulty in operation. At the same time, the remaining amount of stainless steel plate processing or use should be considered. The thickness of the copper plate is not uniform, but the thickness of the same steel plate is to be as uniform as possible. Generally, the medium-sized saw blade has a thickness tolerance of 0.05-o.15 mm. If the requirements are too strict, the grinding costs will also increase. Generally, it is a steel plate with large tensile strength and hardness, and the greater the resistance to mechanical damage, the longer the durability of use, but the processing cost of the grinding boring is also relatively high.

Leave a Reply

Your email address will not be published. Required fields are marked *